Magnet Water Treatment.Introduction To hard Water:Hard water is the cause usually of scale formation as it contains high concentrations of minerals. These are largely Magnesium and Calcium. Hard water is not bad for you but rather for your plumbing pipework. The affects are scale in dishwashers, taps and shower-heads leading to a reduction in flow. It may also reduce the suds created by your soap.Quite a few companies now make and supply magnetic cleaners for central heating systems. Crystal Palace Plumbers fit magnetic cleaner units. If your central heating system has been installed for many years, then you will no doubt at some stage have experienced or will probably experience in the future the symptons of scale formation. This means that a system like the magnetic water cleaner is a good option for you and is something that you can fit in on your pipework quite easily.The Magnetic Cleaner:Briefly, works by passing water through a strong magnetic field and changes the structure of the deposits in the water, making them less likely to stick to the inner walls of the pipes. Note: This way of operation does not make the hard water any softer.Brief Guide To Fitting:1). Isolate and drain the heating system. Locate an accessible position on the pipework to connect the cleaner. Usually close to the boiler.2). Always read and work to the manufacturers instructions completely, they are quite basic to understand. If you are not confident to do this yourself you can always call a professional like a Crystal Palace Plumber who understands magnetic cleaning systems. 3). Depending on the construction the magnets usually clamp around the pipework. They do not need an electrical supply.4). Once the magnets are fitted the system you will need to fill the heating system again.